done
Liquids Liquids 
PRODUCT USAGE
Liquids done
Dangerous Goods MAIN FEATURES
Reusable metallic pressure discharge IBC's for liquids.
- Cylindrical steel tank – pressure tested to 3 Bar.
- Replaceable fork lift base.
- Tank lining options.
- Tank colour options.
- Vinyl graphics options.
All PCM IBC's are UN performance tested and certified for the carriage of dangerous goods. PCM IBC's are manufactured to withstand application and release of internal pressure of up to 3 BAR throughout their service life. The application of internal pressure enables the rapid discharge of container contents. Typically 1000 litres of product can be discharged in 6 minutes using an applied pressure of 2 BAR; this compares with 30 minutes to discharge using gravity alone.
The PCM 1000 is available in Stainless Steel and unlined. Our PCM's last many years in service even with aggressive chemicals. Refer to our IBC Utilisation Guide to see how to maximise IBC performance and to check whether your products are compatible with our IBC's. More info
INDUSTRY SECTORS
Chemical Distribution
Speciality Chemicals
Nuclear
expand_less expand_more
DESCRIPTION
The PCM 1000 is a reusable IBC designed for the transportation, storage and pressure discharge of hazardous liquids.
The pressure discharge method is highly cost effective; containers are not left with customers. Instead a unit on average can achieve 3 deliveries a week. The container also comes with a “Safety Air Feed”. The SAF enables delivery personnel to discharge the IBC quickly and effectively, whilst safely standing on the ground. The cylindrical tank body, manufactured from steel, is inherently much stronger than square tanks and with no crevices it is therefore easy to clean down. The tank body is painted to provide resistance to the external environment. The pallet base is detachable and replaceable. The pallet base connects with the tank so units can be stacked for loading and space saving. It can also be painted or galvanised to provide excellent resistance to the elements. It has four way fork truck entry with anti-tilts and a two way pallet truck entry to improve handling efficiency.
The Tank inlet which is 460mm in diameter has a HDPE¹ lid with a galvanised carrying strap and is secured by 24 bolts. It is fitted with an EPDM³ seal and 2 x 38mm camlock and dustcaps. The outlet consists of a 50mm threaded outlet pipe in HDPE from the tank body to a 50mm GRPPāµ lockable ball valve, fitted with EPDM³ seals and terminating in a 38mm integral camlock adapter complete with a dustcap. The dustcap is retained to the valve handle via a retaining cable.
expand_less expand_more
SPECIFICATION
Specification
| Dimensions | |
|---|---|
| Width/Depth/Height (mm) | 1200 / 1200 / 1810 |
| Inlet diameter (mm) | 460 |
| Outlet diameter (mm) | 50 |
| Tare weight (kg) | See product range |
| Nominal capacity (L) | 1000 |
| Composition | |
| Tank | Steel |
| Lining | LLDPE1 |
| Pallet base | Steel |
| Closure | HDPE2 |
| Closure gasket | EPDM3 |
| UN Certification | |
| GP II, SG 2.6 | |
| Options | |
| Various top vents and ports | |
| Stainless steel construction | |
| Painted tank and pallet base | |
| Hypalon rubber tank lining | |
| Vinyls on tank | |
| Label plates on tank | |
| Outlet valve seal options |
- Linear Low Density Polyethylene
- High Density Polyethylene
- Ethylene Propylene Diene Monomer
Dimensions subject to normal manufacturing tolerances.
expand_less expand_more
PRODUCT RANGE
Product Range
expand_less expand_more
OPTIONS
Options
More details on the options outlined below can be found by clicking on the Downloads tab and selecting the pdf you require.
Standard
Not Available
Optional
- Linear Low Density Polyethylene
- Stainless Steel
- High Density Polyethylene
- Glass Reinforced Polypropylene
- Ethylene Propylene Diene Monomer
expand_less expand_more
DOWNLOADS
DOWNLOADS
expand_less expand_more
ENQUIRE