sales@francisward.com
01274 707030 Pressure Bin 250
Product Usage
Main Features
- Cylindrical steel tank – pressure tested to 3 Bar.
- Replaceable fork lift base.
- Tank lining options.
- Tank colour options.
- Vinyl graphics options.
All PCM IBC’s are UN performance tested and certified for the carriage of dangerous goods. PCM IBC’s are manufactured to withstand application and release of internal pressure of up to 3 BAR throughout their service life. The application of internal pressure enables the rapid discharge of container contents. Typically 1000 litres of product can be discharged in 6 minutes using an applied pressure of 2 BAR; this compares with 30 minutes to discharge using gravity alone.
The PCM 1000 is available in Stainless Steel and unlined. Our PCM’s last many years in service even with aggressive chemicals. Refer to our IBC Utilisation Guide to see how to maximise IBC performance and to check whether your products are compatible with our IBC’s.
Industry Sectors
-
-
250 UnlinedCapacity – L
250
Height – mm
1570
Weight – kg
123
250 PE LinedCapacity – L
250
Height – mm
1570
Weight – kg
141
-
250 Unlined
UN Certified
Tank CompositionPainted Steel
Stainless SteelTank Lining CompositionNatural LLDPE¹
Rubber (Hypalon)
Unlined
Closures300mm (12”) 12 bolt lid – SS2
516mm (20”) 24 bolt lid – SS2
516mm (20”) 24 bolt lid – HDPE3
Valves50mm (2”) GRPP4 Ball valve
with EPDM5 seal50mm (2”) GRPP4 Ball valve
with Viton seal50mm (2”) SS2 Ball valve
with EPDM5 seal50mm (2”) SS2 Ball valve
with Viton sealTop Fittings38mm (1½”) GRPP4 Cam Lock
and dust cap50mm (2”) GRPP4 Cam Lock
and dust cap75mm (3”) GRPP4 Cam Lock
and dust cap38mm (1½”) SS2 Cam Lock
and dust cap50mm (2”) SS2 Cam Lock
and dust cap75mm (3”) SS2 Cam Lock
and dust cap25mm (1”) SS2 Pressure relief vent (PRV)
50mm (2”) GRPP4 Combined
anti-vacuum and PRVCustomisationTank colour choice
Pallet base paint choice
Galvanised pallet base
SS2 Label plates
Vinyls, corporate and/or contents
Pallet base drip guard
250 PE LinedUN Certified
Tank CompositionPainted Steel
Stainless SteelTank Lining CompositionNatural LLDPE¹
Rubber (Hypalon)
Unlined
Closures300mm (12”) 12 bolt lid – SS2
516mm (20”) 24 bolt lid – SS2
516mm (20”) 24 bolt lid – HDPE3
Valves50mm (2”) GRPP4 Ball valve
with EPDM5 seal50mm (2”) GRPP4 Ball valve
with Viton seal50mm (2”) SS2 Ball valve
with EPDM5 seal50mm (2”) SS2 Ball valve
with Viton sealTop Fittings38mm (1½”) GRPP4 Cam Lock
and dust cap50mm (2”) GRPP4 Cam Lock
and dust cap75mm (3”) GRPP4 Cam Lock
and dust cap38mm (1½”) SS2 Cam Lock
and dust cap50mm (2”) SS2 Cam Lock
and dust cap75mm (3”) SS2 Cam Lock
and dust cap25mm (1”) SS2 Pressure relief vent (PRV)
50mm (2”) GRPP4 Combined
anti-vacuum and PRVCustomisationTank colour choice
Pallet base paint choice
Galvanised pallet base
SS2 Label plates
Vinyls, corporate and/or contents
Pallet base drip guard
-
-
Product Enquiry
Please complete the form below if you would like to enquire about our products.
