DGL – Francis Ward

DGL

Call now

DGL

Product Usage

liquids

general purpose

Main Features

Reusable IBC’s for liquids.

Robust welded and galvanised steel frames.
Replaceable rotationally moulded seamless plastic liner.
Optional top inlets and bottom outlets.
Liner cone outlets of 60°, 90° and 120°.
Capacities from 500 – 2250 litres.

DGL’s are manufactured to provide users with tough long lasting liquids containment and transportation capabilities. Frames last many years and the liners can be replaced when necessary. The cone angle on the liner can be selected to meet the flow requirements of the liquid contents. We can advise on liner service life performance with a wide range of contents based on our extensive product performance database.

Industry Sectors

DESCRIPTION/SPEC
PRODUCT RANGE
OPTIONS
DOWNLOADS
ENQUIRE

Description

The DGL is a reusable IBC designed primarily for the transportation and storage of viscous liquids.

The DGL liner is rotationally moulded in natural coloured UV stabilised linear medium density polyethylene. The polymer provides strong resistance to industrial wear and tear. The liner has a conical base to enable total draining of the contents. It is supported and protected by a galvanised mild steel frame providing excellent resistance to the elements. The units are interstackable for loading and space saving and have integral four way fork truck entry with anti-tilts to improve handling safety and efficiency.

The liner inlet is a 350mm HDPE4 screw cap fitted with an EPDM² O-ring seal. The outlet is a 50mm fusion welded socket to a single union UPVC3 ball valve fitted with EPDM² seals. It is attached to the liner via a fusion welded 50mm BSP male threaded socket. A 50mm BSP female threaded end on each side of the valve terminates in a 50mm male camlock adaptor and dustcap. The dustcap acts as a secondary closure and is secured to the outlet via a cable.

Dimensions

Width/Depth (mm)	1180/1180
Height (mm)	See product range
Inlet diameter (mm)	350
Outlet diameter (mm)	50
Tare weight (kg)	See product range
Nominal capacity (L)	See product range

Composition

Liner	LLDPE¹
Frame	Mild Steel (galvanised)
Screw Cap Lid	LMDPE²
Screw cap seal	EPDM³
Outlet	UPVC⁴
Outlet Seal	EPDM³

Options

460 mm clamp band lid, 460 mm arag lid

Various valves / seals, including viton

75mm outlet

Fusion welded HDPE4 flanged outlets are available for connecting stainless steel butterfly valves

Full fork tunnels on frame (maximum handling stability)

Venting / anti-vac / pressure relief

Vinyl logos

Trem card holders

Coloured liner

Anti-static liner

Linear Medium Density Polythylene
High Density Polyethylene
Ethylene Propylene Diene Monomer
Unplasticised Polyvinyl Chloride

Dimensions subject to normal manufacturing tolerances.

Product Range

500
Capacity – L
500
Height – mm
1525
Tare Weight
116

750
Capacity – L
750
Height – mm
1724
Tare Weight
124

1000
Capacity – L
1000
Height – mm
1850
Tare Weight
130

1250
Capacity – L
1250
Height – mm
2099
Tare Weight
151

1500
Capacity – L
1500
Height – mm
2338
Tare Weight
190

1750
Capacity – L
1750
Height – mm
2521
Tare Weight
197

2000
Capacity – L
2000
Height – mm
2754
Tare Weight
212

2250
Capacity – L
2250
Height – mm
3008
Tare Weight
240
Options
More details on the options outlined below can be found by clicking on the Downloads tab and selecting the pdf you require.

Standard

Not Available

Optional

500

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

750

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

1000

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

1250

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

1500

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

1750

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

2000

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner

2250

Outer Frame Composition
Galvanised Steel
Steel
Stainless Steel
Powder Coated Steel

Liner Composition
Natural LMDPE¹
Anti-static LMDPE¹
Black semi-conductive LMDPE¹
Flame retardant LMDPE¹

Closures
360mm (14”) Screw cap
460mm (18”) Clamp
band lid
360mm (14”) Arag lid

Valves
Butterfly valve – SS²
50mm (2″) Ball valve
50mm (2”) Dry break valve

Top Fittings
Anti-vacuum vent (AV)
Pressure relief vent (PRV)
Combined AV and PRV

Handling

Anti-tilts in frame
Fork tunnels
Castors

Customisation
Coloured liner
Graphics on liner
Downloads

DGL Range Database

GP IBC Liner

IBC Handling

Customisation

IBC Closures

IBC Top Fittings

FW Container Colour Range

IBC Frames

Liquid Valves
Product Enquiry

Please complete the form below if you would like to enquire about our products.

Please enable JavaScript in your browser to complete this form.
Name
First
Last

the product Comment

COMPANY
Email
Phone
Name the product you are enquiring about
Comment or Message

FRANCIS WARD

GET IN TOUCH

Whether you’re looking for a sustainable, long-lasting alternative to single-use containers or need a custom solution for your unique business requirements, FRANCIS WARD is here to help.

Our team are ready to discuss your requirements and provide a solution that not only meets your operational needs but also supports your company’s environmental goals.

GET IN TOUCH

Get in touch

Product Enquiry