Warlord
Product Usage
Main Features

Reusable plastic drums for liquids.
- Rotomoulded seamless heavy walled drums.
- Up to 5 years of service life capability.
- Optimal draining design.
- 20L, 28L and 30L capacities.
- Wide range of colours available.
- Closure options including UN compliant hand tight option.
- Printing options.
The Warlord is a pallet efficient design with optimal draining capability. The Warlord can be specified with a range of closures including a UN compliant hand tight option.
The 28L Warlord CF has an integral dry break coupler for sealed transfer of hazardous liquids. All Warlord types have been UN performance tested and certified for the carriage of dangerous goods.
Refer to our Drum Utilisation Guide to see how to maximise drum performance and to check whether your products are compatible with our drums.
-
Description
The Warlord is a re-usable drum primarily designed for use with dangerous liquids. The square round form enables efficient pallet space utilisation.
The container incorporates an integral ergonomically shaped handring, an offset pouring spout and secure interstacking features. Side walls are provided with large label attachment areas. The design allows optimal draining with less than 0.1% of nominal capacity retained when the container is emptied.
The closure is of buttress type. The 30 Litre Warlord is available with an optional hand tight closure (7 Nm). A vented hand tight closure is available for products requiring pressure relief.
The Warlord CF has a closed dispense system for use with products that need to be handled avoiding human contact.
The container is rotationally moulded in LMDPE. Unlike blow moulding the process is essentially stress free and creates a container with no seams or welds. The body of the moulding is of generally uniform wall thickness with thickening in corners and radii where reinforcement is of most benefit.
The polymer used in the manufacture of the container is highly UV stabilised and exhibits excellent low temperature impact strength, chemical resistance and environmental stress crack resistance.
DimensionsWidth/Depth (mm)305/325Height (mm)See product rangeFilling Inlet diameter (mm)50Tare weight (kg)See product rangeNominal capacity (L)See product rangeCompositionLinerLMDPE1ClosureLMDPE1Closure GasketSee product rangeOptionsColourVarious closuresTop printSide printUN Certification20L – Group II / SG 2.0
30L – Group II / SG 1.9- Linear Medium Density Polythylene
Dimensions subject to normal manufacturing tolerances.
-
Product Range20L
UN Approved
YES (CERT.FW 6231)
Capacity – L
20
Height – mm
363
Tare Weight
2.4
Standard Cap
Closure Torque (Nm)20
Vented Cap
Closure Torque (Nm)20
Hand Tight Cap
(Butyl Seal)N/A
Hand Tight Cap
(FKM Seal)N/A
Hand Tight Vented Cap
(Butyl Seal)N/A
Closed Dispense System
N/A
30LUN Approved
YES (CERT.FW 6041)
Capacity – L
30
Height – mm
463
Tare Weight
3.0
Standard Cap
Closure Torque (Nm)30
Vented Cap
Closure Torque (Nm)30
Hand Tight Cap
(Butyl Seal)7
Hand Tight Cap
(FKM Seal)7
Hand Tight Vented Cap
(Butyl Seal)7
Closed Dispense System
N/A
28L CFUN Approved
YES (CERT. FW 6293)
Capacity – L
28
Height – mm
464
Tare Weight
2.9
Standard Cap
Closure Torque (Nm)N/A
Vented Cap
Closure Torque (Nm)N/A
Hand Tight Cap
(Butyl Seal)N/A
Hand Tight Cap
(FKM Seal)N/A
Hand Tight Vented Cap
(Butyl Seal)N/A
Closed Dispense System
28
-
Options
More details on the options outlined below can be found by clicking on the Downloads tab and selecting the pdf you require.
StandardNot AvailableOptional20LUN Certified
Non UN Certified
CompositionNatural LMDPE1
Coloured LMDPE1
Black HDPE1
Closures50mm (2”) Screw cap
– XLPE² seal50mm (2”) Vented
screw cap – XLPE² seal50mm (2”) HT³
Screw cap – Butyl seal50mm (2”) HT³
Vented screw cap
– Butyl seal50mm (2”) HT³
Screw cap – Viton sealClosed dispense system
PrintingUN marketing
Top print
30LUN Certified
Non UN Certified
CompositionNatural LMDPE1
Coloured LMDPE1
Black HDPE1
Closures50mm (2”) Screw cap
– XLPE² seal50mm (2”) Vented
screw cap – XLPE² seal50mm (2”) HT³
Screw cap – Butyl seal50mm (2”) HT³
Vented screw cap
– Butyl seal50mm (2”) HT³
Screw cap – Viton sealClosed dispense system
PrintingUN marketing
Top print
28L CFUN Certified
Non UN Certified
CompositionNatural LMDPE1
Coloured LMDPE1
Black HDPE1
Closures50mm (2”) Screw cap
– XLPE² seal50mm (2”) Vented
screw cap – XLPE² seal50mm (2”) HT³
Screw cap – Butyl seal50mm (2”) HT³
Vented screw cap
– Butyl seal50mm (2”) HT³
Screw cap – Viton sealClosed dispense system
PrintingUN marketing
Top print
-
Product Enquiry
Please complete the form below if you would like to enquire about our products.
Whether you’re looking for a sustainable, long-lasting alternative to single-use containers or need a custom solution for your unique business requirements, FRANCIS WARD is here to help.
Our team are ready to discuss your requirements and provide a solution that not only meets your operational needs but also supports your company’s environmental goals.